- Home
- /
- Products
- /
- Forging Presses
- /
- KP Series

KP Series
Knuckle-joint cold forging presses
The cold forge technology applies to the forming process of steel components without cutting its metal fibers and with strong consistency strength given by a proper forging treatment, concerning two essentials as required for the mass-production.
Feature
- Near-net-shape forming
- Better mechanical characteristic
- Superior plasticity
- Better surface quality
- Higher productivity
Specification
Product | KP-250 | KP-400 | KP-650 | KP-850 | ||||
---|---|---|---|---|---|---|---|---|
S | V | S | V | S | V | |||
Capacity-ton | 250 | 400 | 650 | 850 | ||||
Rated Tonnage Point-mm | 4 | 6 | 8 | 8 | ||||
Stroke Length-mm | 120 | 160 / 180 | 160 / 180 | 180 | ||||
Strokes Per Minute-S.P.M. | 40 | 30-50 | 32 | 25-40 | 30 | 25-35 | 30 | 25-35 |
Die Height (S.D.A.U.)-mm | 370 | 400 | 400 | 400 | ||||
Bolster Area (L.R. x F.B.)-mm | 500×600 | 550×660 | 600×700 | 600×700 | ||||
Slide Area (L.R. x F.B.)-mm | 400×420 | 400×500 | 450×550 | 450×550 |
Product | KP1200 | iLS1-260C | ||
---|---|---|---|---|
Capacity-ton | 1200 | 2000 | ||
Rated Tonnage Point-mm | 8 | 8 | ||
Stroke Length-mm | 250 | 180 | ||
Strokes Per Minute-S.P.M. | 25-30 | 22-32 | ||
Die Height (S.D.A.U.)-mm | 600 | 550 | ||
Bolster Area (L.R. x F.B.)-mm | 800×1000 | 1000×800 | ||
Slide Area (L.R. x F.B.)-mm | 800×800 | 800×700 |