Straigh Side Double Crank Servo Press
Straight-side 2-point eccentric gear direct drive servo presses perfectly integrates traditional mechanical presses and digital control system, which leads to intelligent, composite, and green craft tech. The servo system could freely control slide movement to meet the needs of forming materials that are hard to process, this expands the use of stamping machinery.
With built-in Bottom Dead Center (BDC) stability detector, High Precision linear detection device could fully improve the precision of product non-defect rate and prolong die life.
Automatic safety door provides not only for security but also necessary working-spaces for maintenance. The safety during operation could be increased with front photoelectric safety devices.
The control system is equipped with user-friendly touch screen, which not only elevates operational convenience, but also displays press operation index and status on screen for real-time monitor. Nine different kinds of built-in curves mode could be selected according to varied features of forming materials.
|Rated Tonnage Point-mm||6||6||6||6||6|
|Strokes Per Minute-S.P.M.||~60||~50||~40||~40||~40|
|Die Height (S.D.A.U.)-mm||450||500||600||60||700|
|Bolster Area (L.R. x F.B.)-mm||1650×600||1950×700||2300×850||2400×1100||2400×1100|
|Slide Area (L.R. x F.B.)-mm||1950×800||2250×900||2600×1100||2700×1200||2700×1300|